Under no circumstances must the absolute maximum ratings (given in below) be violated. Stress exceeding one or more of the limiting values may cause permanent damage to the device. Parameter Min Max Unit Condition Supply voltage –0.3 3.9 V All supply pins must have the same voltage Voltage on any digital pin –0.3 VDD+0.3, max 3.9 V Voltage on the pins RF_P, RF_N and DCOUPL –0.3 2.0 V Voltage ramp-up rate 120 kV/µ Input RF level +10 dBm Storage temperature range -50 150 °C Solder reflow temperature 260 °C According to IPC/JEDEC J-STD-020D ESD ＜500 V According to JEDEC STD 22, method A114, Human Body Model Electrical Specification Tc=25℃ ,RFMOD_VDD=3V if nothing else stated NO Parameters Min Typ Max Unit Condition 1 Supply 1.1 supply voltage 1.8 3.6 V 2 Current consumption 2.1 power down mode 2 uA 2.2 Idle mode 2 mA 2.3 Rx states 20 mA 2.4 Tx states 23 mA 3 Transmitter Part 3.1 Tx data rate 250 Kbps 3.2 Frequency range 2400 2483.5 MHz 3.3 Output power -5 dBm 3.4 Spurious emissions 25MHz-1GHz -36 dBm 47-74,87.5-118,174-230,470-862MHZ -54 dBm 1800-1900MHz -47 dBm At 2-RF and 3-RF -41 dBm Otherwise above 1GHz -30 dBm 4 Receiver Part 4.1 Receiver sensitivity -80① dBm